Error codes for critical errors
The device might report these fault codes on the screen.
If you encounter a fault code, please post on the meshtastic.discourse.group
and we'll try to help.
We detected that the main CPU voltage dropped below the minimum acceptable value
Generated
from enum value: BROWNOUT = 9;
INVALID_RADIO_SETTING
INVALID_RADIO_SETTING:7
The channel tried to set a radio setting which is not supported by this chipset,
radio comms settings are now undefined.
Generated
from enum value: INVALID_RADIO_SETTING = 7;
NONE
NONE:0
TODO: REPLACE
Generated
from enum value: NONE = 0;
NO_AXP192
NO_AXP192:6
This board was expected to have a power management chip and it is missing or broken
Generated
from enum value: NO_AXP192 = 6;
NO_RADIO
NO_RADIO:3
No Lora radio hardware could be found
Generated
from enum value: NO_RADIO = 3;
RADIO_SPI_BUG
RADIO_SPI_BUG:11
A (likely software but possibly hardware) failure was detected while trying to send packets.
If this occurs on your board, please post in the forum so that we can ask you to collect some information to allow fixing this bug
Generated
from enum value: RADIO_SPI_BUG = 11;
SLEEP_ENTER_WAIT
SLEEP_ENTER_WAIT:2
A software bug was detected on entry to sleep
Generated
from enum value: SLEEP_ENTER_WAIT = 2;
SX1262_FAILURE
SX1262_FAILURE:10
Selftest of SX1262 radio chip failed
Generated
from enum value: SX1262_FAILURE = 10;
TRANSMIT_FAILED
TRANSMIT_FAILED:8
Radio transmit hardware failure. We sent data to the radio chip, but it didn't
reply with an interrupt.
Generated
from enum value: TRANSMIT_FAILED = 8;
TX_WATCHDOG
TX_WATCHDOG:1
A software bug was detected while trying to send lora
Error codes for critical errors The device might report these fault codes on the screen. If you encounter a fault code, please post on the meshtastic.discourse.group and we'll try to help.
Generated
from enum meshtastic.CriticalErrorCode